RGB LED Tape, IP65 Waterproof, 15w, 60 LEDs P/M

Do you like hosting parties, gatherings, or events? If that is the case, level up your space by adding this RGB colour-changing LED strip light! In one LED strip, you will get access to millions of colours, which you can take advantage of when setting up the aesthetic and atmosphere of your get-togethers! 

Aside from that, this LED strip light is powered by LED technology, so it would not leave a massive dent in your electrical bill, even if it produces outstanding illumination. In fact, it only needs 15w per metre! On top of that, it can last for 50,000 hours which is ten times longer than an average lighting solution!

This is a 24v DC LED strip light, meaning you’ll need an LED driver to make it run. You cannot wire it directly to the mains circuit because it’s not like those mains-powered light fixtures.

To know which LED driver to use with your strip lights, you have to multiply the total length of the strips you’re using by the wattage per metre of the strip. So, if your project needs ten metres of the strip and it’s fifteen watts per metre, multiply the two. Then look for an LED driver equal to or higher than the requirement of the strip light. Never use an LED driver with a lower capacity than what your strips need.

We offer a free bespoke cutting service when you purchase this LED strip light! Let us know the length that you need, and we’ll see to it that it’s delivered to you as you requested. Just note that this LED strip is cuttable every 100mm, so when you place your order, round off to the nearest 100mm.

Besides the free cutting service, we’ll also solder a 1-metre cable at the end of the strips so you can immediately proceed to the installation when you get your order. No more measuring, cutting and soldering! If you need a longer cable or have a specific request for your strip lights, call us at 0333 443 2465, and we’ll gladly assist you.

This LED strip light has different control options, so you can tailor-fit it based on your lifestyle and requirements. You can pair it with an LED-compatible traditional wall dimmer, remote control or smart speakers like Alexa or Google Home. Just ensure that you have the right driver-controller combination to guarantee that it will work.

If you use your strip lights with our extensive collection of remote control, you will need a standard LED driver. Alternatively, if you prefer an LED-compatible wall dimmer, couple it with a dimmable LED driver. Nevertheless, you will still need a regular LED driver to make the strip lights work whether or not you want to dim them.

If you’re looking for a lighting solution for your bathroom or in areas where water is frequent, your search is over! This LED strip light is IP65 rated; therefore, you can use it anywhere in your home, including the bathroom’s zone 1. Even if jets and splashes of water reach this strip light, it will not short-circuit or malfunction!

You can use this LED strip light as task lighting over your kitchen counters and work desk or accent lighting behind the television in your living room. You can also utilise this LED strip to highlight architectural structures and unique features in the room to give it more depth and dimension!

Installation is stress-free when it comes to this LED strip light since it has an adhesive backing which adheres to almost any surface. Just wipe the area clean, peel the cover of the 3M double-adhesive and stick it to where you need the strip lights to be! 

As for the wiring, follow the installation instructions and get the right LED driver for your preferred control option. You can also use an LED profile to protect the strip lights from dust, dirt and curious finger and give it a more finished and refined look!

Although mounting this strip light is fairly easy, call for an electrician if you’re not confident doing it alone.