Pack Of 10 6w Circular LED Panels, 120mm Diameter

Are you planning to redo your office lighting system? If so, you need to check out this LED panel bundle! In one pack, you’ll get ten high-quality LED panels that will elevate the visuals of your space and allow your company to lessen electrical and maintenance expenses! 

In addition, because it’s designed with LED technology, it produces less heat and is eco-friendly. If your company intends to go green, using these fixtures will enable you to move several steps towards your goal! Say you’re only planning to redo a small part of your workspace and think there will be excess. Well, if you’re left with extra panels after your renovation, you can keep them in your storage room and pull them out wherever you have plans to redo other parts of your office!

The best part about this LED panel bundle is it comes in three different colour temperatures: cool white, natural white, and warm white light! 

Cool white and natural white light are both ideal for task lighting. The only thing that sets it apart is cool white has a bluish tint, whereas natural white does not have any shades of blue or yellow. Cool white is suitable in your conference room and meeting room because it will keep everyone focused and alert. On the other hand, natural white is better for the main office space because it’s more comfortable on the eye, even if you work under it for several hours!

As for warm white light, it has a yellowish tone, creating a cosy ambience. You can use it in your break room, so people can relax adequately before returning to work!

Lighting takes up a massive portion of your electricity bill. If you’re not careful, a huge chunk of your profit will end up going to your expenses rather than your bank accounts! So, to prevent this from happening or worsening, you’ll need to switch to this LED panel!

This LED panel light only requires a minimal 6w of power to produce 420 lumens maximum brightness with a wide 120-degree bam angle! If you compare it with non-LED fittings, you won’t get anything that can make the same results! Also, it lasts for 20,000 hours, so you won’t only gain savings from your electricity consumption but also from your maintenance cost.

You may not think of it on regular days, but emergency lights are necessary – they can even save lives! This is particularly crucial if you’re operating an office or a building where several people work or reside. If you already have this LED panel light, you don’t need to worry too much because you can just convert some to emergency lighting!

To do this, all you need to get is our emergency converter kit and connect it to your panel lights. Once it’s set up, the converted panel will be able to last for 3 hours after the main power supply is cut, giving you ample time to regroup or exit! Just note that it requires 24 hours to charge. 

Knowing the measurement of your lighting fixtures is essential during the installation process. Whether you’ll do it yourself or not, knowing this information will enable you to properly decide the placements of your lights. Don’t just wing it and randomly spread out your panels across the room. Ensure that it’s appropriately spaced, so you don’t end up with shadows and imbalances.

Remember, this LED panel is 12mm tall with a 120mm diameter and requires a 110mm cut-out hole. It’s pretty slim; therefore, even if you have a narrow ceiling void, it’ll fit perfectly! As for the cut-out hole, be very accurate with this to prevent your lights from falling off your ceiling!

Would you go for a fixture that is hard to install or one that’s quick and easy? It’s obvious, right? Of course, the quick and easy! If your business is already running in full swing and you just want to update your fixtures, you don’t want to spend weeks on your upgrades. The faster it’s finished, the quicker you can resume your work. 

Fortunately, this LED panel is super easy to mount! It’s mains powered, so you don’t need a driver or transformer to make it work. Once you’re done wiring, you can use it immediately! Just remember, if you don’t know anything about electrics, get an electrician to do it. This way, you’re safe, and your lights are correctly installed!