Colour Temperature Adjustable LED Tape – Warm To Cool White 2750-6500K

While it is common for LED strip lights to have dots when illuminated (because of the LED chips), some people prefer if there weren’t. Well, if you are one of them, then you will love this LED strip light. It’s dotless; therefore, you’ll get a consistent stream of illumination throughout the reach of your strips! 

It’s perfect for any application, and you can use it anywhere in your home except in the bathroom and other areas where water is frequent. This LED strip light is IP20 rated only. So, it’s only suitable for indoor spaces like your living room, bedroom, dining room, hallway, storage room, kitchen, and other dry areas!

This LED strip light is colour tuneable, meaning you’ll get cool white natural white and warm white light in one strip! Just note that you’ll need to use either our remote control or wall controller to transition between the colour temperatures.

How can you incorporate cool white, natural white, and warm white light into your lighting system? Cool white and natural white are excellent for task lighting. Both can improve a space’s functionality and boost an individual’s focus and productivity. The only difference between the two colours is cool white has a crisp bluish tone, while natural white has no shades of blue or yellow. Alternatively, warm white light is ideal for ambient lighting because its yellowish tone can create a relaxing environment! 

When you purchase this LED strip light, we offer a free bespoke cutting service! All you have to do is add to your basket (in metres) what you only need, and we will cut it according to your requirements. On top of that, we’ll solder a 1m long wire to each strip, so when it’s delivered to you, your LED strip lights are ready to be installed!

With this service, you do not have to waste your time and effort cutting and soldering by yourself. Plus, you’ll buy and pay for what you actually need rather than getting several metres of strips that are too much for your intended application. 

Although this LED strip light brings in a lot of brilliance, it will not make your electricity bill skyrocket! It only requires a minimal 12w power to produce a whooping 1440 lumens maximum brightness per metre!

In addition, this LED strip light can last for 30,000 hours which is ten times longer than a traditional lighting fixture! So, if you have these strips replace your incandescent or fluorescent fixtures, not only will you save from a lowered electrical consumption, but you can also keep some from your reduced maintenance expenses! It’s a guaranteed win for you because you’ll enjoy a brilliant home without spending unnecessarily on electricity and upkeep.

There are many ways to control this LED strip light. You just need to get the appropriate accessories to manage them the way that fits your preference!

You can pair this strip light with a remote control so you can switch between colour temperatures and dim and brighten your lights even without standing from your seat. There’s also a wall controller option that enables you to perform the same functions, but you’ll have to go to where the mounted control panel is.

If you’re more into a more advanced alternative, you can add our smart controller with your strips, so you can connect it with smart speakers like Alexa or Google Home for voice control!

Since this LED strip is a 24v DC lighting solution, you’ll need an LED driver to make it work. To know what driver to get, you’ll have to multiply the wattage per metre of the LED strip by the number of metres you’ll get. The product is the total wattage you need to account for, which should be rounded up to the nearest available driver.

So, if this LED strip is 12w per metre, and you’ll get 6 metres, your strips will be 72w in power. Therefore, you will need a LED Driver that’s 72w or higher, like our 100w LED driver. 

As for controlling this strip light and accessing its function, you’ll need our colour-adjustable remote control or our dual white CCT wall-mounted controller.