5m Long 4mm Flexible Neon Flex / Strip Lighting – Dotless

If you are on the lookout for a trendy lighting design that you can add to your home, you should check out this neon flex dotless strip light! It’s flexible, cuttable, and slim, allowing you to bend the strip to the shapes that you want. Also, it’s only 4mm thick, so you can easily tuck it behind furniture pieces or cabinetry should you require it!

This neon flex strip light is sold in a 5-metre-long roll with pre-soldered cables on both ends. It’s cuttable every 50mm, so you can cut to the sizes you need! Just ensure that you trim within the cutting marks to avoid damaging the strips. 

Powered by the famous energy-efficient LED technology, this neon flex LED strip light does not require much electricity to produce outstanding illumination. Although it only requires 24w of power, it can make 1525 lumens maximum brightness with a wide 160-degree beam angle! 

Not only that! It’s also expected to last for 30,000 hours which is ten times longer than an incandescent bulb. With this strip light, you can have an aesthetically pleasing space and earn savings from a lowered electricity bill and maintenance expenses. It’s a win-win for you, no matter what angle you look at! So, don’t waste your resources on lighting solutions that will make your electricity bill skyrocket without delivering your desired illumination!

This neon flex LED strip light is available in three colour temperatures: cool white, natural white, and warm white light. Here is a closer look at how each colour is unique from each other!

Cool white and natural white are both typically used for task lighting. They are exquisitely bright, boosting an individual’s concentration and improving a space’s functionality. The only difference between the two LED colours is that cool white has a crisp bluish tone, while natural white has no hints of blue or yellow. Alternatively, warm white light is normally used for ambient lighting because its yellowish hue (similar to an old incandescent bulb) can create a relaxing and cosy ambience!

Since this neon flex LED strip light is 24v DC, you’ll need an LED driver to make it work. It’s not like those mains power lighting fixtures that can be wired directly to the mains circuit. If you don’t pair this LED strip with a driver, it’ll not work.

We recommend matching this neon flex LED strip light with our Titan+ LED driver to make it work and produce the stunning luminance it ought to display. Also, please take note that the 5-metre-long roll of this neon flex strip amounts to 24 watts in power. So, make sure to purchase the 30w LED driver (still from our Titan+ LED driver).

You can use this neon flex LED strip light all throughout your home because it is adequately protected against solids and liquids. It is IP65 rated, so you can install it in your living room, garage, dining room, bedroom, kitchen, home office, storage room, and bathroom (including zone 1). Even if jets and splashes of water come into contact with these strip lights, they will not short-circuit or malfunction.

While this neon flex strip light is water-resistant, it is not ideal for underwater applications because it’s not 100% waterproof. So, if you are planning to submerge your lights, you will have to find one with an even higher IP rating. 

Installation is not an issue with this LED neon flex strip light! It’s straightforward and fast as long as you have everything you need. After securing a compatible LED driver, you must clean the surface where you’ll mount your strip and assemble all the necessary tools. When you’re all set, follow the step-by-step instructions and stick the strip light onto the area you prepared! 

If you’re not confident doing the installation yourself, it’s best to stop and call for an electrician. They know what to do, have the right tools and can execute the mounting process safely. Also, you’ll have more peace of mind and confidence that your strip lights are installed correctly!