12w Dotless, COB IP67 Waterproof LED Strip – Colour Adjustable / Tunable

Our COB (dotless) LED Strip is suitable for any room in your space. It is IP67, which means that you can use it everywhere including the kitchen, bathroom and even outdoors.

This LED Strip is also colour tunable, this means that you can adjust the LED colour from warm white all the way upto cool white, by using a simple to use LED controller, you can also smoothly dim the brightness of the light (the LED controller is sold seperately)

We offer a fully bespoke solution and we cut all of our LED tape to measure, so you can buy the individual lengths of light which you need and we will cut them and solder a 1m long wire onto the end of every strip.

Accessories:

LED Drivers – this LED strip is 24v DC which means that you need a LED Driver to use this product.

Please see our full selection below:

https://www.simplelighting.co.uk/led-strip-lights/led-drivers/

The LED strip is 12w per metre, the driver must be above the wattage which you are using. So as an example: if you are buying 6m of LED Strip 6m * 12w = 72w in power – therefore you would need a LED Driver rated 72w or higher, such as our 100w one, seen here: https://www.simplelighting.co.uk/100-watt-led-driver-3-year-warranty-in-12v-or-24v-dc/

LED Controllers – because this LED tape light is colour tunable / adjustable, you need a way to control the LED colour and the brightness, please choose either of these below:

Remote control:

https://www.simplelighting.co.uk/colour-adjustable-remote-control-receiver-4-channel/

Wall controller:

https://www.simplelighting.co.uk/wall-mounted-controller-for-dual-white-cct-led-products-mains-powered/

Technical Information:

• Dimensions: 14mm wide * 3mm deep
• SMD2835
• 12w per metre
• CRI >90
• 5 Year Warranty
• Lumens: 1440 per metre
• IP67 Rated
• 24v DC